上海腾西工控设备有限公司

产品名称：

西门子CPU416模块

 

产品型号：

6*7 416-2XN05-0AB0

6*7 416-3XR05-0AB0

6*7 416-3ER05-0AB0

 

产品价格：

电议

 

产品图片：

 

产品概述：

• 高端性能范围内的* CPU
• 适用于对性能要求很高的工厂
• CPU 416-3 PN/DP 中集成了 PROFINET 功能

 

产品应用：

CPU 416-2, CPU 416-3 and CPU 416-3 PN/DP are powerful SIMATIC S7-400 CPUs.

The integrated PROFIBUS DP interfaces in the CPU 416-2 and CPU 416-3 make it possible to connect directly to the PROFIBUS DP fieldbus as a master or slave.

An additional DP master system can be connected to the CPU 416-3 and CPU 416-3 PN/DP using the IF 964-DP interface module.

The integrated PROFINET interface of the CPU 416-3 PN/DP includes switch functionality when the ERTEC 400-ASIC is used. This forms the basis for providing two externally accessible PROFINET ports. In addition to hierarchical network *ologies, this also enables the creation of line structures in the new S7-400 controllers.

Note:
Only the 6*7 964-2AA04-0AB0 interface submodule may be used.

 

产品设计：

 

Both CPUs are equipped with the following:

• Powerful processor:
  The CPUs achieve instruction execution times as low as 0.03 µs per binary instruction.
• CPU 416-2: 5.6 * RAM (of which 2.8 * each for program and data);
  CPU 416-3: 11.2 * RAM (of which 5.6 * each for program and data);
  CPU 416-3 PN/DP: 11.2 * RAM (of which 5.6 * each for program and data);
  fast RAM for parts of the user program relevant to execution.
• Flexible expansion:
  Up to 262144 di*al and 16384 *og inputs/outputs.
• Multi-point interface MPI:
  With the MPI it is possible to establish simple networking of max. 32 stations at a data tran*ission rate of up to 12 Mbit/s. The CPUs can establish up to 44 connections to stations of the communications bus (C bus) and the MPI.
• Mode selector switch:
  Designed as toggle switch.
• Diagnostics buffer:
  The last 120 fault and interrupt events are retained in a ring buffer for diagnostic purposes. The number of entries can be parameterized.
• Real-time clock:
  The date and time are appended to diagnostic messages of the CPU.
• Memory card:
  For expansion of the integrated load memory. RAM and FEPROM cards (FEPROM for retentive storage) are available
• Combined MPI/DP interface and integrated PROFIBUS DP interface (CPU 416-2 and CPU 416-3):
  The PROFIBUS DP master interface allows a distributed automation configuration offering high speed and ease of use. From the user's point of view, the distributed I/O is treated as central I/O (same configuring, addressing and programming).
  Mixed configuration: SIMATIC S5 and SIMATIC S7 as PROFIBUS master according to EN 50170.

CPU 416-3 and CPU 416-3 PN/DP also include:

• A module slot:
  An additional PROFIBUS DP master system can be connected via the IF 964-DP interface module.

CPU 416-3 PN/DP additionally includes:

• PROFINET interface with 2 ports (switch):
  • PROFINET I/O, 256 IO devices connectable
  • PROFINET CBA

 

产品功能：

• Block protection:
  A p*word concept protects the user program from unauthorized access.
• Integral HMI services:
  The user only has to specify the source and destination of the data with HMI devices. The data are then transported cyclically and automatically by the system.
• Integrated communications functions:
  • PG/OP communication
  • Shared data communication
  • S7 standard communication
  • S7 communication
• Firmware update using network

CPU 416-3 PN/DP additional:

• Open communication over TCP/IP, UDP and ISO-on-TCP (RFC1006)
• Distributed intelligence in Component Based Automation (CBA) on PROFINET
• Additional diagnostic options with integrated web server

Parameterizable attributes

The STEP 7 tool "Hardware Configuration" can be used to program the properties and response of the S7-400 including the CPUs, e.g.

• Multi-point interface MPI:
  • Definition of station addresses.
  • Startup/cycle behavior
  • Stipulation of the maximum cycle time and communications load
• Address *ignment:
  Addressing of I/O modules.
• Retentive ranges:
  Definition of the number of retentive bit memories, counters, timers, data blocks and clock memories.
• Size of the process image, local data.
• Length of the diagnostics buffer
• Protection level:
  Definition of access authorization for program and data
• System diagnostics:
  Definition of the handling and scope of diagnostic messages
• Timed interrupts:
  Setting of periodicity

CPU 416-3 PN/DP additional:

• PROFINET interface
• Parameterization of time synchronization using NTP procedure

Indication and information functions

• Status and error indicators:
  LEDs indicate internal and external errors and operating states such as RUN, STOP, Restart, Test function, for example
• Test functions:
  The programming device can be used to display signal states in program execution, modify process tags irrespective of the user program, read out the contents of stack memories, run separate program steps and inhibit program components
• Information functions:
  The programming device can be used to provide the user with information on the memory capacity and operating mode of the CPU and the current utilization of the working and load memories

 

产品参数：

产品描述 SIMATIC S7-400，CPU 416-2 *处理单元，带： 5.6 * 工作内存， （2.8 *代码，2.8 *数据）， 1个接口 MPI/DP 12 *T/S， ，2个接口 PROFIBUS DP 产品生命周期 准许供货 产品停产阶段 产品取消 产品停止供货 2006-11-21

一般信息
硬件产品状态	04
固件版本	V5.3
附带程序包的
工程系统	从附带硬件更新的 STEP7 V5.3 SP2 起
RUN 模式下的 CiR 配置
CiR 同步时间，基本负载	100 ms
CiR 同步时间，每个 E/A 从站的时间	10 µs
电源电压
DC 24 V	否; 通过系统电压进行电压供给
输入电流
来自 CPU，*大值	400 型毫不相干（300 型*明显）
来自背板总线 DC 5 V，典型值	0.9 A
来自背板总线 DC 5 V，*大值	1.1 A
来自背板总线 DC 24 V，*大值	300 mA; 每个 DP 接口 150 mA
来自 DC 5 V 接口，*大值	90 mA; 在每个 DP 接口处
功率损失
功率损失，典型值	4.5 W
功率损失，*大值	5 W
存储器
存储器类型	RAM
工作存储器
集成	5.6 Mbyte
集成（用于程序）	2.8 Mbyte
集成（用于数据）	2.8 Mbyte
可扩展	否
装载存储器
可扩展 FEPROM	是; 附带存储卡（闪存）
可扩展 FEPROM，*大值	64 Mbyte
集成 RAM，*大值	1 Mbyte
可扩展 RAM	是; 附带存储卡 (RAM)
可扩展 RAM，*大值	64 Mbyte
缓冲
存在	是
带电池	是; *数据
不带电池	否
蓄电池
缓冲器电池
电池操作	不相关
缓冲器电流，典型值	125 µA; （至 40 °C）
缓冲器电流，*大值	550 µA
缓冲器时间，*大值	参见组件数据参考手册，第 3.3 章
CPU 上的外部缓冲器电压供电	DC 5 至 15 V
CPU-处理时间
对于位运算，典型值	30 ns
对于字运算，典型值	30 ns
对于定点运算，典型值	30 ns
对于浮点运算，典型值	90 ns
CPU-组件
DB
数量，*大值	10000; 数字条：1 至 16000
容量，*大值	64 kbyte
FB
数量，*大值	5000; 数字条：0 至 7999
容量，*大值	64 kbyte
FC
数量，*大值	5000; 数字条：0 至 7999
容量，*大值	64 kbyte
OB
数量，*大值	参见操作列表
容量，*大值	64 kbyte
可用循环 OB 数量	1; OB 1
时间报警 OB 数量	8; OB 10-17
延迟报警 OB 数量	4; OB 20-23
唤醒* OB 数量	9; OB 30-38（*小可设置循环时间 = 500µs）
过程报警 OB 数量	8; OB 40-47
DPV1 报警 OB 的数量	3; OB 55-57
等时模式 Ob 数量	4; OB 61-64
多值计算 OB 数量	1; OB 60
后台 OB 数量	1; OB 90
启动 OB 数量	3; OB 100-102
异步错误 OB 数量	9; OB 80-88
同步错误 OB 数量	2; OB 121、122
嵌套深度
每个优先等级	24
错误 OB 中的附加等级	2
计数器、定时器及其剩磁
S7 计数器
数量	2048
剩磁
可调整	是
下限	0
上限	2047
已预设	Z 0 至 Z 7
计数范围
下限	0
上限	999
IEC 计数器
存在	是
类型	SFB
数量	不限制（只通过 RAM 进行限制）
S7 时间
数量	2048
剩磁
可调整	是
下限	0
上限	2047
已预设	无时间剩余
时间范围
下限	10 ms
上限	9990 s
IEC 计时器
存在	是
类型	SFB
数量	不限制（只通过 RAM 进行限制）
数据范围及其剩磁
可保留数据范围，*	整个工作和装载存储器（附带缓冲电池）
标记
数量，*大值	16 kbyte; 标记范围的大小
存在剩磁	是
预设剩磁	* 0 至 * 15
定时标记数量	8; （在 1 个标记字节中）
数据组件